KRAUSE & BECKER 62915 Guia De Inicio Rapido página 3

Painting
Before painting: setup, release pressure, then prime, if needed
1. Prime then adjust
nozzle to spray setting.
Painting Techniques
Before painting, practice on scrap surface, spraying approx. 1 ft. from surface
1. Keep gun straight.
Clearing Spray Tip
Clear the spray tip as needed
1. Turn power off.
5. Spray into
waste bucket until
clog clears.
Returns not accepted & warranty void
if sprayer is not properly cleaned
immediately after every use.
Hi SprayL ow SprayP rime/Clean
2. Set Pressure Control
Knob to lowest setting
then increase as needed.
2. Do not fan or paint
will be uneven.
2. Adjust nozzle to
clean setting.
6. Release trigger.
Roll
3. Overlap strokes.
3. Turn spray knob
to spray setting.
7. Adjust nozzle to
spray setting.
Clean sprayer immediately to
prevent permanent damage.
OVERLAP
4. Turn power on.