Installation; Tools Needed; Materials Needed - NuTone LPN80 Guia De Instalacion

Page 3

Installation

Tools needed

• Power screwdriver with a Phillips bit
• Phillips screwdriver
• Wire insulation stripper
• Wire cutter
1
Remove from Packaging

Materials needed

• 4" round metal ducting recommended for best performance.
Use of other ducting is acceptable but may impact performance.
• Roof cap or wall cap (built-in damper recommended)
• Tape to seal duct connections
• Drywall screws, sheet metal screws or wire
• Electrical wiring and supplies per local code requirements
LPN80
n
Punch out Mask
from packaging.
See Step 5.
Installation Guide