2 Before using the equipment
2
Before using the equipment
CAUTION
Read and fully understand everything in this manual.
DANGER. RISK OF ELECTROCUTION
Before performing any mechanical or electrical tasks, disconnect the
equipment from the electrical supply.
2.1 Safe transport
WARNING
Transport and handle the equipment with extreme care to prevent
scratches or imperfections in the equipment.
2.2 Unpacking
1. Unpack the equipment once it has arrived at its final destination.
2. Verify that it comes complete with all the parts.
2.3 Recommendations for installation
The minimum water pressure should be 3 Kg.
Put a monophase 220V socket at approximately 100 mm from the
switchboard.
The hot and cold water point should be 22 mm in diameter with a ¾"
thread.
Place a drainage inlet or longitudinal grid of 2000x200 mm just below the
shower column so that the water collects correctly.
6/16
Installation Manual–Wellma Showers