Installation - Aprimatic M230LE Instrucciones

3. Installation

B
C
D
!
The pictures above refer to the M230LE unit: for the M230HE model,
follow the same installation sequence regardless of the different
dimensions of box and appliance.
A
A) Remove the 4 screws from the
cover and pull out the appliance by
loosening the 2 fixing screws.
B) Drill the box in the positions
shown and fix it to the wall with
some bolts. To keep the sealing
unaltered, smear the drilled holes
with some silicone.
C) Fit the strain relief clamps (or
plugs) provided.
D) Insert the wires in the mounted
clamps. Although not compulsory, it
is advisable to insert the wires as
follows: Q motor power cable R
mains power cable S optional
cable
devices and T optional cable for
outside antenna.
E) Connect the wires to the
appliance,
appliance to the box using the
screws
appliance, then fit the terminal box
cover plate.
Close the cover.
E
Information
20
for controls
refit and
removed. Program
and safety
fix the
the