Video Cabling; Power Cabling - flir C346ZC252 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3 Connecting the Camera

3.1 Video Cabling

You can extend the video signal from this camera using a single ex-
tension cable between the camera and the DVR. See the table below
for the maximum cable run lengths for all supported cable types:
Specification
RG59 20AWG Conductor 95% Braid CSA/UL or
C(UL) Approved
RG6 20AWG Conductor 95% Braid CSA/UL or C
(UL) Approved
Analog CCTV Balun
* Long cable runs over 1000ft may be affected by electro-mechanical
interference (EMI), which can increase the amount of noise in the pic-
ture in some installations.

3.2 Power Cabling

See the table below for required cable gauge for longer power cable
runs. For other installations, connect the included 12V DC power
adapter directly to the camera. Due to voltage drops, it is not recom-
mended to extend power cabling beyond 100ft (31m).
Power Cable Gauge
18AWG
17AWG
15AWG
#; r. 7.0/47030/47030; en-US
Maximum Length
Up to 50ft (15m)
Up to 60ft (18m)
Up to 100ft (31m)
Maximum
Length
Up to 985ft
(300m)*
Up to 1640ft
(500m)*
Up to 300ft
(91m)
6

Publicidad

Tabla de contenido
loading

Tabla de contenido