Underside View And Left View; Battery And Probe Installation; Accessories - Gima OXY-50 Guía De Uso

5.2 Underside view and left view

Figure 3. Underside View and Left View
1. Probe jack : It is used to connect a SpO
2. USB port :It is used to connect a personal computer to export the trend data via a data line.

5.3 Battery and probe installation

A. Refer to Figure 4. and insert the two AA size batteries properly in the right direction.
Figure 4. Batteries installation
B. Replace the cover.
C. Inserting the SpO
2
duced by our company; never replace it with the similar ones by other manufacturers).
Please take care when you insert the batteries for the improper insertion may damage the
device.
If the alarm function is on, the device will provide high-priority alarm signal when the
battery is in low power status. Intermittent alarm will occur and the battery icon turns red in the
state of flashing.
High priority indicating that immediate operator response is required.

5.4 Accessories

A. Dry battery(2AA)
B. A User Manual
C. A data line
D. A disk (PC software)
E. An adult-oximeter probe
ENGLISH
2
probe of the pulse oximeter in the upper jack. (The probe is limited to be pro-
sensor to measure the oxygen saturation and pulse rate.
22