Samsung LN-S4096D Manual De Proprietário página 23

4
Press the or
then press the ENTER button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Air+Cable : "Air" and "Cable" antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto program.
By default, the cable TV system is set to "STD".
If you want to select another type of cable system,
press the or button to select "STD", "HRC" or "IRC".
• STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
5
Press the ENTER button to start the auto program.
The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
After all the available channels are stored, the Auto program
menu reappears.
Select "Return" by pressing the
press the ENTER button to return to the previous menu.
Press the EXIT button to exit.
• The TV must be connected to air/cable in order to receive digital
TV signals. Even if a particular channel is deleted from the memory,
you can always tune to that channel directly by using the number buttons
on the remote control.
• When connecting Digital Cable to a Set-Top Box, Channel Memorization is
done on the STB.
To view the STB on your TV, select the Input jack the STB is connected to
with the SOURCE button on the remote control. (see page 32)
All available DTV and analog channels are automatically stored in memory.
English-21
button to select the Antenna connection,
or button, then