Bushnell 119519 Manual De Instrucciones página 8

is not new or already formatted, please format it on your computer before
using it (FAT32 recommended).
Before inserting the SD card into the card slot after opening the camera's
front cover, please make sure that the write-protect switch on the side of the
card is "off" (NOT in the "Lock" position).
The following describes how to insert and remove the SD card:
• Insert the SD card into the card slot with its label side upwards (see
below). A "click" sound indicates that the card is installed successfully.
If the wrong side of the card is facing up, you will not be able to insert
it without force-there is only one correct way to insert cards. If the SD
card is not installed correctly, the device will not display an SD card
icon on the LCD in SETUP mode.
• To take out the SD card, just gently push in the card (do not try to pull
it out without pushing in first). The card is released from the slot and
ready to be removed when you hear the click.
USING THE SURvEILLANCE CAM
Once you've prepared your Surveillance Cam by properly installing
batteries and an SD card, you could simply install it in the area you wish to
monitor, switch it on and leave-and you might get some great photos that
are exactly what you wanted. However, we highly recommend that you first
spend some additional time with this manual and your camera until you know
a bit more about what the "Setup Mode" and those control keys do. If nothing
else, you'll probably want to at least set the date and time so the camera will
imprint them (or not-it's your option) on your photos as they are taken, learn
how to set the camera to shoot video clips instead of still photos if you like,
and read some tips about mounting it.
8
WARNING
Be sure the camera's power is switched OFF
before inserting or removing SD cards or batteries.