Power Sources; Battery Installation - memorex MP4047 Guia Del Usuario

This unit is designed to operate on AC household current or DC (batteries).
AC
Use the AC polarized line cord included with the unit for operation on AC power.
Insert one end of the AC line cord into the AC power jack on the rear of the unit
and the other end (with the 2 blades) into a
conveniently located AC outlet having 120V, 60Hz.
When the AC cord is plugged in, the batteries will
NOTE: The AC plug supplied with the unit is
be disconnected.
polarized to help minimize the possibility of electric
shock. If the AC plug does not fit into a
nonpolarized AC outlet, do not file or cut the wide blade. It is the user's
responsibility to have an electrician replace the obsolete outlet.

BATTERY INSTALLATION

To use this unit with battery power, remove the battery door on the bottom of the
unit by pressing in on the tabs and then lifting the battery door off. Insert eight
(8) 'C' size batteries following the
NOTES:
diagram in the compartment.
• The
AC power
disconnected from the AC power jack
on the rear of the unit in order for the
unit to operate on battery power.
• For longer-lasting life for the batteries,
remove the batteries from the battery
compartment if the unit is not to be
used for a long period of time.
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer's directions.)
HEADPHONES JACK (TOP OF UNIT)
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to this
jack. The speakers are automatically disconnected when the headphones plug is inserted in
the jack.

POWER SOURCES

cord must be
BATTERY PRECAUTIONS
7
AC Outlet
AC Plug