Electric Shock; Fire Prevention - Darex WORK SHARP Guia Del Usuario

www.worksharptools.com
IMPORTANT
!
Safety Warnings & Precautions
For your own safety, please read this User's Guide before operating
WORK SHARP
The Wood Tool Sharpener
®
Installation / Assembly
• Carefully unpack WORK SHARP
on a table or workbench. Check to see that no damage has occurred
in shipment. Check all packing material to be sure that all parts are
present. See User's Guide page 6 for part identification diagram.
• The WORK SHARP unit needs to be placed on a flat stable tabletop
®
to complete assembly.
• Connect to properly wired outlet, or electrical shock may occur.
Precautions
FIRE CAN CAUSE DEATH, INJURY AND PROPERTY DAMAGE!
Reduce the risk of death, injury or property damage from fire. Read,
understand and follow these safety instructions. Make certain that any-
one else who uses this sharpener or who is a bystander in the sharp-
ening area understands and follows these safety instructions as well.
Remember, sharpening produces sparks and hot metal debris that can
start fires, burn skin and damage eyes.
ELECTRIC SHOCK CAN KILL! Reduce the risk of death or serious
injury from shock. Read, understand and follow these safety instruc-
tions. Make certain that anyone else who uses this sharpener or who
is a bystander in the sharpening area understands and follows these
safety instructions as well.
SHARPENING DEBRIS CAN INJURE EYES AND BURN SKIN! Re-
duce the risk of injury from sharpening debris. Read, understand and
follow these safety instructions. Make certain that anyone else who
uses this sharpener or who is a bystander in the sharpening area un-
derstands and follows these safety instructions as well.

FIRE PREVENTION

Sharpening operations create hot sparks
and sharpening debris:
1. The work area must be kept clean and free from all
flammable material.
2. The workbench should be protected with an appropriate
heat resistant cover to prevent fire or scorching of surfaces.
3. Keep an approved fire extinguisher of the proper size
and type in the work area. Inspect it regularly to ensure
that it is in proper working order. Know how to use the
fire extinguisher.
4. WARNING: NEVER perform sharpening operations in
the presence of flammable liquids or gasses.
The Wood Tool Sharpener and set it
®

ELECTRIC SHOCK

WARNING Electric Shock Can Kill! Read, understand and follow ALL
Safety instructions.
• AVOID BODY CONTACT WITH EARTHED OR GROUNDED
SURFACES (e.g., pipes, radiators, ranges, refrigerators).
• DO NOT ABUSE THE CORD. Never yank the cord to disconnect it
from the socket. Keep the cord away from heat, oil and sharp edges.
Do not modify the electrical plug provided—if it will not fit the out-
let, have the proper outlet installed by a qualified electrician.
• USE PROPER EXTENSION CORD. Use only 3-wire extension cords
that have 3-prong grounding plugs and 3-pole receptacles that ac-
cept the tool's plug. Make sure your extension cord is in good condi-
tion. When using an extension cord, be sure to use one heavy enough
to carry the current your product will draw. Please refer to the fol-
lowing table for minimum cord size requirements:
Ampere Rating Volts
More Not More
Than Than 120v
0 6
• DISCONNECT TOOLS. Always disconnect WORK SHARP
when cleaning, inspecting, and changing accessories. When not in
use, disconnect from the power supply. Never touch internal parts of
the sharpener when it is turned on or plugged in.
25 ft. 50 ft. 100 ft. 150 ft.
AWG
18 16 16
flammable
materials
18" minimum
3
14
unit
®