XO S30S Manual De Utilización página 15

• Fixing to the wall:
Drill the holes A respecting the distances
indicated (Fig.4). Fix the appliance to the
wall and align it in horizontal position to
the wall units. When the appliance has
been adjusted, definitely fix the hood
using the screws A (Fig.5). For the vari-
ous installations use screws and screw
anchors suited to the type of wall (e.g.
reinforced concrete, plasterboard, etc.).
If the screws and screw anchors are pro-
vided with the product, check that they
are suitable for the type of wall on which
the hood is to be fixed.
• Regarding the installation on plaster-
board wall: to make sure that the screws
are well fixed to the bearing elements of
the wall. On the contrary, it is necessary
to install a carrying structure made by
joists from 2 to 4 inches at the level with
the points of anchorage of the screws.
Fig.4
�
�
Fig.5
- 15 -
����
�