Maintenance And Cleaning - lbx V05 Manual De Usuario

Place the speed control knob at the lowest position. Put the instrument on a stable and safe
•
place and plug in the main power.
Push the two-direction switch right to the touch mode.
•
Turn the speed control knob to set speed.
•
If a test tube is pressed into the mixing head vertically, the instrument will begin to work and
•
the power LED will be lit.
Push the two-direction switch left gently to OFF.
•

6. Maintenance and Cleaning

Proper maintenance can keep instrument working and extend its life time.
•
Do not spray the cleanser into the instrument when cleaning.
•
Unplug the power line when cleaning.
•
Only use cleanser as shown below:
•
Note:
• Place vessels as vertical as possible
into the center of mixing head for
proper mixing.
• Adjust the speed control knob slowly
in order to have the instrument works
smoothly.
• Don not run continuous operating
mode at high speed area.
Dyes
Construction
materials
Cosmetics
Foodstuffs
Fuels
Table 2
Isopropyl alcohol
Water containing
tenside / Isopropyl
alcohol
Water containing
tenside / Isopropyl
alcohol
Water containing
tenside
Water containing
tenside
6