D-Link DAP-1513 Guía De Instalación Rápida página 4

TROUBLESHOOTING
seTuP aND CONFiguraTiON PrOBleMs
1. HOW DO I CONFIGURE MY DAP-1513 WIRELESS N DUAL BAND MEDIABRIDGE
WITHOUT THE CD, OR CHECK MY WIRELESS NETWORK NAME (SSID) AND WIRLESS
ENCRYPTION KEY?
- connect your pc to dap-1513 using an ethernet cable.
- open a web browser and enter the address http://dlinkap http://192.168.0.50
- the default username is admin. the default password is blank (leave this box empty).
- If you have changed the password and cannot remember it, you will need to reset the product to
set the password back to default.
2. HOW DO I RESET MY DAP-1513 WIRELESS N DUAL BAND MEDIABRIDGE
FACTORY DEFAULT SETTINGS?
- ensure the product is powered on.
- press and hold the reset button on the rear of the device for 5 seconds.
Note: Resetting the product to the factory default will erase the current configuration settings.
to reconfigure your settings, log into the dap-1513 as outlined in question 1, then run the
setup Wizard.
3. WHY CAN I NOT GET AN INTERNET CONNECTION?
- For cable users, make sure your Isp username and password is correct.
4
®
®
TO
DaP-1513