Garrett ACE 350 Manual Del Usuario página 22

• RELICS Mode
The discrimination pattern for this mode is designed
to eliminate small iron pieces, while detecting good
targets in the lower conductivity range, such as lead,
brass and bronze. Two pixels of ferrous have been
removed and the pattern will appear as:
In RELICS Mode, the lowest 2 ferrous pixels are notched out.
• ZERO Mode
The discrimination pattern for this mode is designed
to detect every type of metal and should be used
when you want to find all metal items or when the
material of the desired object is unknown. As seen in
the illustration below, all 12 discrimination pixels are
switched on—indicating that no metal targets have
been notched out (eliminated).
Switch to the Zero Mode to aid in locating a target
when its signal is inconsistent. Such signals could
mean a trash target is close to a good target.
In ZERO Mode, the discrimination pattern shows all 12 pixels are on.
21
ACE 350™