RCA RTD396 Manual Del Usuario página 19

Playing a Disc -
Play modes for CD (continued)
• Edit mode: Program operation works only when
"Edit mode" is selected.
• Program view: To view tracks/fi les in the
"Program view" list. It is disabled when the
"Program view" list is empty.
• Add to program: Add fi les/tracks to the "Program
view" list. It is disabled if the "Edit mode" item is
not selected.
• Browser view: To view fi les/tracks in the original
view list.
• Clear program: Delete the fi les/tracks in the
Program view list. Select a fi le/track or more you
want to delete in full stop mode (press STOP
twice). " " will appear besides the deleted
fi le/track. Select Clear program and then press
ENTER. It is disabled if the Edit mode is not
selected.
Note
The program will be deleted if disc
tray is opened.
Playing jpeg fi les
Jpeg fi les are image fi les. Make sure that they have
a resolution of less than 2 megapixels.
1. Press the OPEN/CLOSE button to open the disc
tray.
2. Place a disc that contains JPEG fi les and close
the disc tray.
A list of folders/fi les will appear on the screen.
Press or button to select your desired fi le,
and then press ENTER or PLAY button to start
playback.
Press the STOP button to display a folder list.
Rotate an image
Press the ANGLE button repeatedly. The image
will rotate in the clockwise direction as follows:
Special Function
Notes
• The time taken for the contents of the
• Before inserting a disc, make sure it is
AV IN / AUX IN
You can connect Audio or Audio-Video devices
such as a TV, VCR or Set Top Box to this unit using
the AUDIO IN jacks at the back of the unit or AUX
IN jack on the front panel of the unit. This unit will
take the audio from the connected device and
play the audio through the speakers.
Connecting Auxiliary Components
Refer to "Getting sound from external sources
such as a Cable Set Top Box or a TV" for details on
connecting the auxiliary components to the unit.
Selecting AV IN / AUX IN mode
Press the SOUND button on the remote control to
select AV IN/AUX IN mode.
Sound output in AV IN or AUX IN mode
• You may change the Surround Sound setting to
• If the AV IN or AUX IN audio signal is mono, you
disc to be displayed varies according to the
size and number of jpeg fi les on the disc. If
nothing is displayed after a few minutes, the
fi le sizes may be too large. Reduce the fi les'
resolution and write another disc.
compatible with the unit.
select between 6 (5.1) Channel and 2 Channel
(Stereo) mode (see instructions under AUDIO
SETUP).
may not receive audio on all speakers.
EN
19