Abicor Binzel WH Instructivo De Servicio página 24

5 Functional Description
Installing alignment jig for ABITIG-WH
1 Clamping body cpl. WH
2 Clamping device cpl. ABITIG
3 Lever cpl.
4 Mounting plate
5 Test mandrel seat cpl.
Abb. 6 Installing alignment jig ABITIG
1 Use M8 screws to attach the alignment jig to the bores on a flat surface. (The 6 screws are not included with the jig.)
2 Mount the clamping device and the guide device according to the bending angle to be checked on the base plate.
The device has been designed so that all bending angles of a torch series can be tested in one clamping using additionally
screwed on guide devices. For special torches, the alignment jig is customized.
EN - 10
14
13
12
11
10
9
8
7
6
5
6 Knurled screw M8
®
WH 7 Setting sleeve 1/4"
8 Setting sleeve 3/4"
9 Test tip Bi 5/28
10 Test tip Bi 5/24
®
WH
Alignment jig
1
2
3
4
11 Clamping nut M6
12 Test tip M6
13 Setting sleeve 3/4" 16G
ø
14 Bore 9 (6x)
BAL.0022 • 2019-04-23