Download Application; User Guide; Measurement Results; How To Maintain And Store The Unit - VISIOMED bewell connect MyTensio BW-BA1 Manual De Instrucciones

4-6. DOWNLOAD APPLICATION

The following information may be altered.
Download the BewellConnect® app on your mobile or tablet :
- App store or Google Play
- scan the QR Code on the side of the box
Then click on the MyTensio icon.

4-7. USER GUIDE

Launch the BewellConnect® app and click on MyTensio.
- Press START on the screen (app) to begin measurement.
- The armband infl ates automatically. 3 blood pressure measurements are repeated automatically.
- The armband infl ates and defl ates three times in a row based on the MyTensio app procedure.
Do not remove the armband before the 3 blood pressure measurements. The measurements are
automatically sent to the app via Bluetooth 4.0.
- Once the measurements have been taken, the average of the 3 is displayed on the app screen.
- Press the ON/START to turn it off . The unit automatically turns off after approximately 1 minute.
Notes :
- The measurement will be too low if the armband is higher than the heart or too high if it is lower than
the heart.
- If you want to stop the blood pressure measurement at any point, press the ON/START to turn it off .
- Speak to your doctor if you have any questions about using the blood pressure monitor.

4-8. MEASUREMENT RESULTS

The app automatically evaluates the MAM (Microlife Average Mode) and uses WHO colour grading
to provide the result.

5. HOW TO MAINTAIN AND STORE THE UNIT

- Use a dry soft cloth to clean the unit. If necessary, use a cloth lightly dampened with tap water.
- Do not use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff .
- Before using please wash your hand. Do not wash or wet the cuff .
- Avoid placing the unit where direct sunlight, high humidity or dust.
- Roll up the pressure armband and store in its case.

6. HOW TO PREVENT A MALFUNCTION

- Do not drop the device and avoid sudden jars or shocks.
- Do not insert other objects into any holes.
- Do not attempt to disassemble the unit.
- Do not put the unit in water.
- The monitor might not meet its performance specifi cations or cause safety hazard if stored
or used outside the specifi ed temperature and humidity ranges in specifi cations.
22 BewellConnect - BW-BA1 - User Manual - 012015
BW-BA1_MANUAL_FR-UK-NL-SP-DE_072015.indd 22-23

7. SPECIFICATIONS

BewellConnect® MyTensio
Product name
Model BW-BA1
Classification Classe IIa
Measuring method Oscillometric System
Dimensions 55 x 23 x 135 mm - Cuff 22-36 cm
Weight 175g
Measuring range Cuff pressure : 0~299 mmHg
Pulse : 40~180 beat/min
Accuracy Pressure : ± 3mmHg
Pulse : ± 5%
Inflation Electric pump inflation
Deflation Pressure release value
Function IHB (Irregular HeartBeat detector) :Irregular heartbeat detection
Working Temp. Temp : 10~40°C
& humidity Humidity : 15~90%RH
Storage Temp. Temp : -20~60°C
& humidity Humidity : 10~95%RH
Pressure : 80~105Kpa
Technology Bluetooth 4.0
Bluetooth LED Appliance on : Lit LED
Low battery : Flashing LED
Charging : Lit LED
Battery LI-ion Rechargeable battery (650mAh)
Battery life ± 250 measurements
USB USB 2.0 port
Voltage 3.7V
Supplied with 22~36cm armband, instruction manual, quick user guide, storage case,
800mm USB cable
BewellConnect - BW-BA1 - User Manual - 012015 23
15/07/2015 11:48