Safety Precautions - Aiwa LED-251FHD Manual De Usuario

2
en
ENGLISH
Read these safety instructions before using your device and store them for possible future reference.
1. If the cord is damaged, have it repaired
by the manufacturer, it's service center
or a similarly qualified person in order to
avoid any hazard.
2. The power supply must be replaced by a
new one in case of malfunction.
This power supply is not repairable.
3. The socket-outlet should be installed
near the equipment and should be easily
accessible.
4. The product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capacity.
Persons who have not read the manual,
unless they have received explanations
by a person responsible for their safety
and supervision, should not use this unit.
5. Children should be monitored to ensure
that they do not play with the product.
The cord should always be readily accessible.
6.
The apparatus should not be exposed to
7.
dripping or splashing of water or liquids
and no objects filled with liquids such
as flowers vases shall be placed on the
product.
8. Do not impede the normal ventilation of
the product when intended to use.
9. Always leave a minimum distance of 10cm
around the unit to ensure sufficient
ventilation.
10. Open flame sources, such as candles,
should not be placed on top of the device.
11. The device is intended for use only in a
temperate climate.
12. CAUTION:
Danger of explosion if battery is
incorrectly replaced or not replaced by
the same type or equivalent.
13. The battery should not be exposed to
excessive heat such as sunshine, fire or
similar.
14. Different types of batteries, new and
used batteries should not be mixed.
The battery must be installed
15.
according to the polarity.
16. If the battery is worn out, it must be remo-
ved from the product.
The battery must be disposed off safely.
17.
Always use the collection bins provided
(check with your dealer) to protect the
environment.

SAFETY PRECAUTIONS

Thank you for purchasing LED-251FHD: Full HD TV.
AIWA ensures of quality, performance and value. Our engineers have included many useful and
convenient features in this product. Please be sure to read this Instruction Manual completely to
make sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards of workmanship.
It was tested by inspectors and found to be in perfect working order before it left our factory.
Model: LED-251FHD
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
LIGHTNING FLASH WITH ARROWHEAD
SYMBOL
The lighting flash with arrowhead
symbol within an equilateral triangle,
is intended to alert the user of the
presence of uninsulated voltage within
the product that may constitute a risk
of electric shock to persons.
The following label has been affixed to the unit, listing the proper procedure for working
with the laser beam:
Notes:
•
The images appearing in this manual are for reference only.
• Due to continual revision and improvement on our product's design and specifications are subject
to change without further notice.
EXCLAMATION POINT
The exclamation point within an equilateral
triangle, is used to indicate that a
specific component should be replaced
only by the component specified in the
literature for safety reasons.
CLASS 2 LASER PRODUCT LABEL
If the apparatus has the symbol in it's rating
label and the power cord has two pins, the
equipment is a Class II or double insulated
electrical apparatus. lt has been designed in
such a way that it does not require a safety
connection to electrical earth.
3