Infrared Remote Control - Chauvet DJ Intimidator Trio Manual Del Usuario

Intimidator Trio QRG EN
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Intimidator Trio products that you can power
link at each voltage, see the User Manual or the sticker on the product.
Fuse 1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
Replacement
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Infrared Remote The Intimidator Trio is compatible with the Infrared Remote Control 6 (IRC-6)
from Chauvet.
Control 6
The following IRC-6 buttons are used with the Intimidator Trio:
(IRC-6)
• <BLACKOUT> - turns LED on/off
• <AUTO> - selects auto program mode (scrolling)
• <SOUND> - selects Sound-Active mode
• <STROBE> - strobing (0–20 Hz)
• <SPEED> - Pan/Tilt auto program speed
• <SENSITIVITY> - selects sound sensitivity
• <%> - LED dimmer
• <FADE/SNAP> - Press once for Fade color change/Press twice for Snap
• <MANUAL> - manual control
• <R> - red LED manual control
• <G> - green LED manual control
• <B> - blue LED manual control
• <W> - white LED manual control
• <UV> - Zoom/rotating manual adjustment
• <A> - Pan/Tilt manual adjustment
• <+> - Increase
• <-> - Decrease
• <0> to <9> - Select auto program by number
4