Cleaning The Unit; Technical Specifications; Replacement Parts - Kenmore 152.83250 Manual Del Propietário

CLEANINGTHE UNIT
WARNING: To avoid serious injury from electric shock, the Air CAeaner must
be turned OFF and unplugged from the power outlet prior to any cleaning
operation.
1. TumAir Cleaner OFF and unplug from power outlet.
2. Clean unit with a moistened soft cloth only. DO NOTpour or splash water
on the lmit or use any abrasive type cleaner on it_Clean all ex'temal surfaces,
especially the air intake grilles and air outlet.
3. DO NOT attempt to clean the pre-filter or HEPA filter; they are NOT
washable and washing will damage them.
4. RepositionAir Cleaner, plug into power outlet and turn ON.
STORAGE
If you store yourAir Cleaner for more than 30 days, you should:
1. Remove both the HEPA filter and the charcoal pre-filter from the unit.
2. Discard the pre-filter.
3. Wrap the HEPA filter in an air-tight plastic bag or plastic wrap. Be sure that
the filter is totally sealed to protect it from its storage environment.
4. DO NOTput the plastic-wrapped HEPA filter back in tile air cleaner
To restore the Air Cleaner to service:
1, Unwrap the HEPA filter.
2. Install a new charcoal pre-filter
3. Install filter assembly in the air cleaner. See "Filter Replacement" section for
proper installation.
TECHNICALSPECIFICATIONS
Length
Width
Height
Weight
Input Voltage
16.5 in (42cm)
6.7 in (1Z5cm)
14.6 in (37cm)
915.(4ak
120 volts AC, 60Hz
21.3 in (54cm)
7.1 in (18cm)
15.7 in (40cm)
14.1 ib_ (6.4l_
120 volts AC, 60Hz
REPLACEMENT PARTS
Pre-Filter 83156 83157
HEPA Filter 83190 83195