Marker Setup Screen; Black Level Setting; Virtual Surround - Denon DVD-1200 Instrucciones De Operación

PLAYING A DISC
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button during playback to show cur-
rent Track.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press the DISPLAY button again to show current
Group.
• The elapsed and remaining playing time of the current
group will be displayed.
3
Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is play-
ing. L1: Layer 1 is playing).
4
Press the DISPLAY button the fourth time to remove
the display.

Marker Setup Screen

DVD-A DVD-V
Use markers to memorise
your favourite places on a disc.
1 Press the SEARCH MODE but-
ton four times (CD, VCD: three
times) during playback.
• The display screen and Markers will
appear on the TV screen.
2 Press the s or B button to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that "- : - - : - -" appears in the
display.
3 When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times) dur-
ing playback and the s or B button to choose the
desired marker, then press the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step and press the ENTER button will erase
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.
DVD-A
IIII T
VCD ( without PBC
CD
Function
1 2 3 4 5 6 7 8 9 10 AC
-- -- : -- : --

Black Level Setting

Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
1 Press the MODE button during playback.
2 Press the ENTER button to switch
ON/OFF.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original picture
as recorded.
3 Press the MODE or RETURN button to exit.

Virtual Surround

You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1 Press the VIRTUAL button on
the front panel or press the
MODE button twice during play-
)
back.
2 Press the VIRTUAL or ENTER
button to set it 1(Natural effect), 2(Emphasized
effect) or OFF.
3
Press the RETURN button to exit.
1 Press the VIRTUAL button on the front panel or press
the MODE button during playback.
2 Press the VIRTUAL or ENTER button to set
1(Natural effect), 2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTE
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• When MULTI CHANNEL is selected as the audio chan-
nel in the audio setting of the setup menu, Virtual
Surround does not function. Details are on page 26.
– 24 –
DVD-A DVD-V
ON
DVD-A
OFF
CD VCD MP3
VCD
DVD-V
WMA
EN