Install Crescendo/Pci Processor; Upgrade Card; Close Computer - Sonnet CRESCENDO PCI G3 Manual De Instalación

En

Install Crescendo/PCI Processor

Upgrade Card

1. Remove the Crescendo card from the anti-
static package, making sure to handle the card
by the edges (Figure 6). Your card may differ
from what is pictured.
2. If your Crescendo card has a bracket, you will
need to adjust the size of the card by removing
the metal bracket on the top of the card
(Figure 7). Unscrew the two bracket screws and
remove the bracket from the Crescendo card.
Package the two screws and the bracket in the
Crescendo's anti-static package and store it
in a safe place.
3. Align the Crescendo card directly over the
Processor Card Slot (Figure 8). For the
PowerCenter, refer to Figure 4-Label A; for the
PowerCenter Pro, refer to Figure 5-Label A.
Gently press down until the card is firmly seat-
ed in the Processor Card Slot, taking care not to
move or wiggle the board as you install it into
the slot.

Close Computer

1. Replace the case cover and security screw onto
your computer (Figure 9).
2. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
3. Affix the Powered by Sonnet label to the front of
your computer.
Crescendo card
Figure 6; Figura 6
bracket
screw
Figure 7; Figura 7
Crescendo card
Processor Card Slot
Figure 8; Figura 8
security screw
Figure 9; Figura 9
anti-static
package
screw
4-7