Special Laundry Tips - Midea MLE52S7AGS Manual Del Propietario & Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.
Align the two hooks on the front of the drying rack with the holes in
the dryer door opening and press down fully into holes. Rest the rear
support on the dryer back ledge.
3.
Place wet items on top of the drying rack. Allow space around items
for air to circulate. The drying rack does not move, but the drum will
rotate; be sure to leave adequate clearance between items and the
inside of the dryer drum. Make sure items do not hang over the edges
or between drying rack grille.
4.
Close the door.
5.
Select Timed Dry. Select the Air Only, Low or Extra Low Temp setting.
Items containing foam, rubber, or plastic must be dried on a clothesline
or by using the Air Only Temp setting.
6.
When the cycle is selected, the Estimated Time Remaining display
shows the default time. You can change the actual time in the cycle by
increasing or decreasing the cycle time.
7.
Press START/PAUSE.
NOTE: Check the lint screen and remove any lint accumulated from items
dried on the drying rack after the cycle is finished.

SPECIAL LAUNDRY TIPS

Please follow the care label or manufacturer's instructions for drying
special items. If care label instructions are not available, use the following
information as a guide.
Items
Bedspreads &
Comforters
Blankets
38
Drying guide
Follow the care label instructions or dry in Bulky
cycle.
Make sure the item is thoroughly dry before
using or storing.
May require repositioning to ensure even drying.
Use the Normal cycle and dry only one blanket
at a time for best tumbling action.
Make sure the item is thoroughly dry before
using or storing.
May require repositioning to ensure even drying.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mlg52s7agsMle52s7awwMlg52s7aww

Tabla de contenido