Electric Connection And Safety - Orima ORP-40-SX Libro De Instrucciones

3. INSTALLATION AND PREPARATIONS FOR USE
During connections always keep the nut on the gas manifold fixed, while rotating the counter-part.
Use spanners of appropriate size for safe connection. For all surfaces between different
components, always use the seals provided in the gas conversion kit. The seals used during
connection should also be approved to be used in gas connections. Do not use plumbing seals for
gas connections.
Remember that this appliance is ready to be connected to gas supply in the country for which it has
been produced. The main country of destination is marked on the rear cover of the appliance. If you
need to use it in another country, any of the connections in the figure below can be required.
In such a case, contact local authorities to learn the correct gas connection.
Gas Pipe
Seal
Hose
Fitting
Hose
Fitting
Gas Hose
with Collar
Gas Pipe
Seal
Hose
Fitting
Hose
Fitting
Mechanical
Gas Hose
It is required to call the authorized service to be able to make the gas connections appropriately
and in compliance with safety standards.
ATTENTION! Surely do not use any match or lighter for control of gas leakage.
!

3.3. Electric connection and safety

During the electric connection, follow the instructions stated in the user manual.
• The earthing cable must be connected to the earth terminal.
Gas Pipe
Seal
Hose
Fitting
Gas Hose
with Collar
Gas Pipe
Hose
Fitting
Mechanical
Gas Hose
11
Gas Pipe
Seal
Hose
Fitting
Mechanical
Gas Hose
Figure 4