Customizing Suunto M3; Changing General Settings; Changing Timer Settings - Suunto M3 Manual De Usuario

6. CUSTOMIZING SUUNTO M3

You can customize the Suunto M3 settings to fit your personal preferences.

6.1. CHANGING GENERAL SETTINGS

1. Press ENTER in the Time display and select General from the menu.
2. Select the setting you want to change:
• Tones: sets the key tones on/off
• Light: adjusts the backlight. There are three different settings:
• Normal: the light switches on for 7 seconds with a long press of the CHRONO
button or when an alarm is activated
• Off: the light does not switch on at all
• Night use: the light switches on for 7 seconds when you press any of the buttons
• Units: changes the way time and date are shown.
• Contrast: adjusts the display contrast.

6.2. CHANGING TIMER SETTINGS

1. Press ENTER in the Timer display and select Settings from the menu.
2. Select the setting you want to change and press ENTER
• Repeat: the timer countdown is restarted if the setting is On.
• Tones: With TONE SEQ you can define when a sound signal is given during count-
down, for example, with every full ten minutes or with every 10 seconds. With My
tone you can define a custom time for a signal.
Note that the tone selections are independent from each other.
• Sync: The default setting is Down: when the DOWN button is pressed, the timer is
set downwards to the next full minute. When set to Round, the timer is set to the
closest full minute.
14