D-Link DCS-6915 Guía De Instalación Rápida página 11

Standard or Mini Pendant Mount
Follow the steps below to mount the camera enclosure with the pendant mount.
STEP 1
make a cable entry hole on the wall to recess the
cables. alternatively, cables can be threaded
through the cable entry hole on the mounting
plate.
Sponge
STEP 2
to prevent insects from entering the pendant
mount, you may block the cable entry hole with
the supplied sponge in two different ways.
STEP 3
thread the cables through the pendant mount
and affix the pendant mount on the wall with
screws and screw anchors (not supplied).
Sponge
STEP 4
attach the waterproof collar to the pendant
mount.
STEP 5
thread the cables through the cap and affix it
to the pendant mount with the supplied screws
and washers.
STEP 6
Connect the cables to the camera enclosure.
attach the camera enclosure to the mount and
affix it with the supplied bolt.
Note: after threading the cables, please block the cable entry hole with the supplied sponges
to prevent insects from entering the tube.
11