Clarke Vantage 17 Manual De Operacións página 4

ENGLISH
WARNING!
– Before connecting the machine to the electrical mains, make sure that the frequency and voltage shown in
the serial number plate/technical data match the mains voltage.
– Do not use with damaged power supply cable or plug. If the machine is not working as it should, has been
damaged, left outdoors or dropped into water, return it to the Service Center.
– If the supply cable or the plug is worn or damaged, it needs to be replaced by the Service Center.
– Do not pull or carry the machine by the supply cable; never use the power supply cable as a handle. Do not
close a door on the supply cable, or pull the supply cable around sharp edges or corners.
– Do not unplug the machine by pulling the supply cable. To unplug, grasp the plug, not the cable.
– Do not handle the plug or the machine with wet hands.
– Turn off all controls before unplugging.
– Regularly check the power supply cable for damages, cracks, cuts and wear. If necessary, replace it.
– If the power supply cable is damaged, it must be replaced by an authorized Service Center.
– To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in.
Unplug the machine from the outlet when not in use and before servicing.
– The brushes must not come into contact with the power supply cable.
– To avoid electric shock, do not expose to rain. Store the machine indoors.
– Do not leave the machine unattended without being sure that it cannot move independently.
– Do not allow to be used as a toy. Close attention is necessary when used near children.
– Use only as described in this Manual. Use only Clarke recommended accessories.
– Take all necessary precautions to prevent hair, jewerly and loose clothing from being caught in the machine
moving parts or vacuuming parts of this machine.
–
Do not leave the machine unattended without being sure that the machine cannot move independently.
– Do not use the machine on slopes with a gradient exceeding the specifications.
– Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged; always
keep the openings free from dust, hair and any other foreign material which could reduce the air flow.
– While using this machine, take care not to cause damage to people.
– Do not use the machine in particularly dusty areas.
– Do not put any can containing fluids on the machine.
– The machine working temperature must be between +32°F and +104°F (0°C and +40°C).
– The storage temperature must be between +32°F and +104°F (0°C and +40°C).
– The humidity must be between 30% and 95%.
– Always protect the machine against the sun, rain and bad weather, both under operation and inactivity
condition. Store the machine indoors, in a dry place: This machine must be used in dry conditions, it must
not be used or kept outdoors in wet conditions.
– Before using the machine, close all doors and/or covers.
– Do not use the machine as a means of transport.
– Do not allow the brush to operate while the machine is stationary to avoid damaging the floor.
– Do not bump into shelves or scaffoldings, particularly where there is a risk of falling objects.
– Do not tamper with the machine safety guards and follow the ordinary maintenance instructions.
– Do not remove or modify the labels affixed to the machine.
– In case of fire, use a powder fire extinguisher, not a water one.
–
To ensure the proper and safe operation of the machine, have the scheduled maintenance and repair, detailed
in the relevant chapter of this Manual, performed by the authorized personnel or an authorized Service
Center.
– In case of machine malfunctions, ensure that these are not due to lack of maintenance. Otherwise, request
assistance from the authorized personnel or from an authorized Service Center.
– If the machine
• does not work properly
• is damaged
• has water or foam leaks
• has been left outdoors exposed to bad weather conditions
• is wet or has been dropped into wat
turn it off immediately and contact the authorized Clarke Service Center or a qualified technician.
– Carefully read all the instructions before carrying out any maintenance/repair procedure.
– If parts must be replaced, require GENUINE spare parts from a Dealer or Authorized Retailer.
– To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of
this Manual, must be performed by the authorized personnel or by an authorized Service Center.
– Do not wash the machine with direct or pressurized water jets, or with corrosive substances.
– Do not work under the machine without supporting it with safety stands.
4
er
Operator's Manual - Vantage 17 Cable