golmar Nexa Guía Rápida página 3

STANDALONE KEYPAD ACCESS CONTROL - NEXA
Coming from previous page.
( ) - Setting the activation time (relays 1 and 2).
*
In programming mode (see step 1, page 3), press the next example sequences to set an activation time
of 5 seconds (programmable from 01 to 99 seconds) for the relay 1 and relay 2. To exit programming
mode, press the 'C' button.
Sequence relay 1 Field : + output number
4 1
Sequence relay 2 Field : + output number
4 2
( ) LOCK RELEASE INSTALLATION
*
Lock release installation:
If the lock release will be installed in a metal door, use a
and tap the hole. In case of wood door, use a
IMPORTANT:
- The lock release must be of 12Vd.c or a.c (Golmar).
- If connecting a lock release with alternating current in one of the outputs, place the varistor
supplied with access control module on the lock release terminals directly to ensure the
module functions correctly.
( ) INSTALLATION DIAGRAMS
*
( )
*
Standalone access control with Golmar a.c. lock release.
In the diagram below, a TF-104 transformer
( ) 1 If using an a.c. lock release, place the varistor supplied with access control module to the lock
release terminals directly.
If connecting two lock releases, use an additional TF-104 transformer.
If using a safety lock release with inverted functioning (lock release activated in the absence of
voltage), connect the lock release between C1 and NC1 or C2 and NC2.
Transform r e Transform r e
TF-104 TF-104
SEC SEC
PRI PRI
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Main Main
( ) For more information see user manual "TKIT N4301 ML (code 50123637)".
*
https://doc.golmar.es/search/manual/50123637
+ output mode + activation time + key .
0 0 5
+ output mode + activation time + key .
0 0 5
3,5 x 25
DIN-7972
Ø3,5mm drill
Ø3mm drill .
M 4 x 8
DIN-963
(12Vc.a.) is used to power the module .
Access control module
N3301
PL2
PL1
CN1
NA1 C1 NC1 NA2 C2 NC2 P - PL1 PL2
( ) 1
V c a.
( ) 1
V c a.
4
Standalone keypad
access control Nexa
QUICK GUIDE
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar se réserve le droit de toute modification sans préavis .
Golmar reserves the right to make any modifications without prior notice.
C d. 5012 o
golmar@golmar.es
3637 T KIT N4301 N GR REV.0 1
www.golmar.es
Sistemas de comunicación S.A.
E 1 7