Technical Characteristics; Connection Terminals - Comelit Scame OPERA 108.20004622 Manual Tecnico

WARNING
• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed for. SCAME Parre S.p.A. does not assume responsibility for improper use of the
apparatus, for modifications made by third parties for any reason or purpose, or for the use of non-original accessories and materials.
• All the products comply with the requirements of Directive 2006/95/EC (which replaces Directive 73/23/EEC and subsequent amendments), as certified
by the CE mark they carry.
• Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance work.
• Clean using a damp cloth. Do not use alcohol or other aggressive products.
ART. 108.20004622 - 108.20004624 – OPERA MODULE 2/4 GANG
Soft touch Push-button module with 2 or 4 channels. Each button is associated with a channel and a led that is programmable for night-time localization,
also to show the status of the commanded load (Full RGB range of colors). Soft touch push button sends ON-OFF commands, switchover commands, timed
commands, commands for managing roller shutters, dimmers and scenarios.
Power supply voltage
Absorption
Inputs
Max. input cable length
Protection
Indications
Terminal
Positioning
Applicable standards
Approvals
Operating temperature
Storage temperature
Relative air humidity
Dimensions
BUS SIMPLEHOME

TECHNICAL CHARACTERISTICS

24 Vdc ± 5%
max 15mA
8+1, optically coupled digital type
25 m
against reverse polarity (under plastic)
1 bus status indicator LED: when flashing, it indicates data transmission via bus, when
lit up steadily it indicates lack of the power supply negative or incorrect connection
removable for BUS connection
Flush mounting installation in BS standard
electromagnetic compatibility: EN 50081-1 (interference emission) and
EN50082-2 (resistance to interference)
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
86x86x18mm
GREEN (BUS)
RED (+)
BLUE (-)

CONNECTION TERMINALS

Term. Function
- BUS power supply negative
+ BUS power supply +24 Vdc
D BUS data line
• N.B. The module must be programmed vis the
BUS line, using the OPERA/RS232 interface
(20022611) and the SimpleProg programming
software.
• Specifications are subject to change without
notice.
3