Hardware Installation - D-Link ShareCenter DNS-343 Guía De Instalación Rápida

Hardware Installation

Hardware Installation
1. Access the drive bays by sliding
the faceplate up until it unlatches
from the device.
2. Once the faceplate is unlatched,
pull it off of the device, exposing
the drive bays.
3. Insert a 3.5" SATA hard drive
into an available drive bay. Make
sure to align the drive connector
to the endpoint in the DNS-343.
Gently push the drive in until it
connects.
D-Link DNS-343 Quick Install Guide 8