brentwood Kool Zone F-30TW Manual De Operación Y Seguridad página 4

Assembly Instructions:
1. Take out the fan body and parts from the box.
2. Put the base part A onto part B and join them together. Pass the
power cord through the base opening. (Fig.1 and Fig.3)
3. Fix the fan body on the base by tightening the fastening nut from
underneath the base. (Fig.2)
Operation Instructions:
IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
Attention: First use may cause a slight odor or small smoking upon heating,
it is normal. This is a result of the heating element chemical reaction. It quickly
goes away.
Timer Knob
Off/Low/Medium/High
1. Plug the power cord into the wall outlet.
2. Select desired speed: L= Low; M=Medium; H=High.
3. Set the air flow to oscillate by pushing the "OSC" button.
4. Automatic Timer: Turn the knob of the timer to the desired time you
want. The fan will stop with the time is over. Fan will operate non stop
if set to "ON".
4
Oscillate