Setting up your tower
Carefully take the tower body and base out of the packaging.
1. take the screws and washers out
2. Attach the base to the body aligning the two holes in the base with the two holes in the tower
3. Screw the base into the body
4. Attach the four pads to the base bottom to protect the ground,(1pc for spare parts)
5. Stand the tower upright on the floor. The appliance is now ready for use
POWER SOURCE
Inert the AC plug into a conveniently located AC outlet having AC 230V-60Hz.
WARNING: This unit has a long AC cord that can easily be tripped on or pulled on, causing injury.
Please make sure it is arranged so it will not drape over a tabletop, etc. where it can be pulled on
by children or tripped over accidentally.
GENERAL OPERATION
1. Press
button to turn on or tum off the unit.
2. Press the MODE button repeatedly to select the playback source. The LED displayed the
current mode
3. Press the VOL(Volume)+/-Knobs to adjust volume level.
4. Press the MUTE Button on the remote control to turn off the sound. Press it again to restore the
previous sound level.
6. lf the unit is not used for a long period of time, pull out the plug to turn off the unit completely.
PLAY RADIO
1. Press
button to turn on or tum off the unit.
2. Press the MODE button on the unit or the remote control to select FM mode. The unit will be in
FM radio mode. The LED display FM
3. Press and hold AUTO SCAN button on remote, The unit will automatically start and search the
frequencies for the previous or next strong station and stop on that station.
4. Once you find a station you want to save, press the MEM+ button or MEM- until the desired
memory position number appears on the display. Press the MEM again to confirm and save the
current station.
FM: Fully unwind the antenna wire and extend it
USING THE AUX & LINE INPUT
requires an RCA cable or 3.5mm audio cable (included)
1. Connect your auxiliary device (e.g. smart phone/ MP3 player) to the AUX jack or 3.5mm LINE
jack
2. Press
button to turn on the unit. Press the MODE button repeatedly.
3. Press ' Play/Pause 'on your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUX jack.
6