D-Link DSM-520 Guia De Instalacion página 12

Connecting the DSM-520
• HDMI
Plug the HDMI cable into the
HDMI connector on the back
panel of the DSM-520.
Plug the opposite end to the
matching HDMI connector on
your television or audio/video
system.
Note: This cable is not supplied.
By default the DSM-520 is set to Composite/S-Video mode.
Pressing the VIDEO OUT button on your remote control will allow
you to switch between different video modes.
Press the VIDEO OUT button once to switch into SCART mode.

Press the VIDEO OUT button twice to switch into HDMI mode.

Pressing the VIDEO OUT button for a third time will switch

back into Composite/S-Video mode.
High-Defi nition Multimedia Interface (HDMI) supports standard, enhanced, or high-defi nition
video, plus multi-channel digital audio on a single cable.
12