Manual Mode - Imetec M5001 Instrucciones Para El Uso

• Select manual or intellistyle operating mode by pressing
intellistyle will flash alternatively and the display will change colour from pale pink to blue.
• To confirm manual mode (manual is flashing) press
(3) to show the selection. The display is pale pink. See the Instructions for use paragraph:

Manual mode

• To select the intellistyle mode (intellistyle is flashing) press
on the display to show the selection. The display is blue. See the Instructions for use
paragraph: Intellistyle mode.
• If you wish to change your selection press BACK
main screen for selection between manual mode and intellistyle mode. Now press
change from manual mode to intellistyle mode or vice versa.
NOTE: For all uses after the first one, when switched on, if no key is pressed
within 15 seconds, the straightener is automatically set at the last setting selected.
mode
Manual
• Repeatedly press
• Press (6) to confirm the temperature selected. The temperature level selected is steady
and the °C starts flashing to indicate that the straightener is heating. The °C becomes
steady when the temperature set is reached. The straightener is ready to use.
NOTE: The temperature can be selected between 140°C and 220°C. During selection
(5), the temperature varies ascending up to a maximum of 220°C which then starts
again at 140°C; the display remains pale pink. When the desired temperature has been
confirmed, the display turns a shade of colour that is more or less intense depending
on whether the temperature selected is higher or lower.
• If you wish to enable the key lock, press
on the display. This function prevents accidental temperature changes while using the
straightener. To disable the key lock, press
• Take a thin lock of hair, the same width as the plate and place it between the two plates.
• Keep the lock of hair taut with one hand and, with the other hand, slide the closed plate
from the roots down to the ends.
• In manual mode it is recommended to start styling by setting the lowest temperature and
gradually increasing it according to the desired style.
• If you wish to select the intellistyle mode press BACK
in the INSTRUCTIONS FOR USE paragraph; Intellistyle mode.
mode
Intellistyle
• To select your hair type repeatedly press
Hair type
Straight hair
• Press (5) and the icons flash one after the other. To select the icon corresponding with
your hair type, press
disappear.
Hair thickness
Fine
• Press (5) and the icons flash one after the other. To select the icon corresponding with
your hair thickness, press
two disappear.
• If you wish to change your selection press BACK
• During heating of the straightener, the range of symbols lights up in succession and the
display changes intensity of the colour until the temperature for the hair type selected has
been reached. The range is steady. The straightener is ready to use.
• If you wish to enable the key lock, press
on the display. This function prevents accidental temperature changes while using the
straightener. To disable the key lock, press
• Take a thin lock of hair, the same width as the plate and place it between the two plates.
• Keep the lock of hair taut with one hand and, with the other hand, slide the closed plate
from the roots down to the ends.
• If you wish to change the hair type selected, press BACK
(5) to selected the desired temperature. The temperature flashes.
Wavy hair
(6). The icon becomes steady on the display and the other two
Medium
(6). The icon becomes steady on the display and the other
9
(5): the words manual and
(6). manual is steady on the display
(4) until the display returns to the
(6) twice quickly. The padlock
(6) twice again quickly.
(4) twice and follow the indications
(5).
(4) and repeat the selection.
(6) twice quickly. The padlock
(6) twice again quickly.
(6). intellistyle is steady
appears
Curly hair
Thick
appears
(4) once and repeat the
5 to