Door Alignment; Adjusting Temperature Control - rvision RCR1710 Manual De Instrucciones

English

Door Alignment

1. Remove the top hinge cover using a flat head screw driver. Gently lift from
the rear of the hinge and slide forward.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
4. Replace the top hinge cover by aligning the rear of the cover with the rear
of the hinge. Press firmly on the front of the cover until it snaps in place.
English
English
fig.1
6
6