Lock And Unlock; Temperature Setting; Interior Light - Magic Chef MCWBC77DZC Manual Del Usuario

Lock and Unlock

• The lock feature is designed to prevent the settings of your wine and beverage center
from being adjusted accidentally. In order to adjust any of the settings you must
unlock the control panel by pressing the
Once the unit is unlocked, an audible beep will be heard and the
light will turn off.
• If no selection is made to adjust the unit in approximately one minute, the control
panel will automatically return to the lock mode.
• To lock the unit manually, press the
• Under locked mode, the control pad function is disabled, and the
light will flash for 5 seconds to remind you that the control panel is locked.

Temperature Setting

• Unlock the control panel by pressing the
Once the control panel is unlocked, an audible beep will be heard and the
indicator light will turn off.
• Under normal conditions, the temperature display indicates the current temperature
of the corresponding zone. When adjusting the temperature, the temperature display
will flash to indicate that the temperature is being adjusted.
• The temperature in the upper & lower zones can be set independently by pressing
the warmer or
temperature range of both zones can be set between 39
• When the warmer or
increase or decrease in increments of one degree. If the
is pressed and held for 2 seconds, the temperature displayed will increase or
decrease at a speed of one degree per half second.
• Once you have adjusted the upper and/or lower zone to the desired temperature,
release the temperature pad. At this time the temperature displayed will flash for
approximately 3 seconds to confirm the selected temperature. Once the display stops
flashing the temperature display will indicate the current temperature of that zone.
Note: The temperature display can be changed between Celsius and Fahrenheit by
simultaneously pressing and holding both
seconds. This unit cannot be in

Interior Light

• To turn on / off the interior light, press the
mode to perform this operation.
Note: The light will turn OFF after the touch pad is released.
lock pad.
colder touch pads corresponding to the desired zone. The
colder pad is pressed, the temperature displayed will
lock mode to perform this operation.
ENG - 11
lock pad for approximately 3 seconds.
lock pad for approximately 3 seconds.
o
F to 61
warmer or
warmer and colder pads for about 3
light pad. The unit cannot be in
11
lock indicator
lock indicator
lock
o o o
F (4 C to 16 C).
colder pad
lock