Remington iLight IPL 3500 Guía De Uso Y Cuidado página 59

Table 4: Recommended Separation Distances between Portable and Mobile RF
Communications Equipment and the device
The device is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the device
can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and
the device as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
output power of
transmitter W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
IPL3500_18817_V2.indd 59
Separation distance according to frequency
of transmitter m
150 kHz to 80 80 MHz to 800
MHz MHz
0.12
0.37
1.17
3.7
11.7
59
800 MHz to 2,5
GHz
0.12 0.23
0.37 0.74
1.17 2.33
3.7 7.38
11.7 23.33
10/30/17 3:36 PM