Bosch FPE-7039 Manual Del Usuario página 15

MUX expansion module
5 Connector terminal plug
If the FPE-7039 board is not mounted to the FACP board, mount
it using the instructions above.
1.
2.
3.
4.
Bosch Security Systems. Inc.
Insert the three plastic standoffs (see callout 3 in the above
figure) in the mounting holes in the enclosure.
Mount the I/O module (callout 2 above) in the FACP
enclosure (callout 1 above).
Connect the wire harness of the I/O module to the terminal
on the FPE-7039 (callout 5 above).
Connect the yellow and green earth ground wire (callout 6
above) to the FACP 's earth ground terminal.
Mounting | en
6 Yellow/green wire
connecting the I/O
module to the FACP
ground terminal
2016.10 | 1.0 | F.01U.330.684
15