Symbols On The Display; Technical Data - Husqvarna Automower Connect 4G Manual De Usuario

Note:
When you put the product into storage for a
long period, it is recommended to switch off the main
switch to save battery power. With the GeoFence
function on, a PIN code is necessary to switch off the
product. If you switch off the main switch, the
®
Automower Connect stays on for 12 hours. After that it
is not possible to communicate with the product and the
GeoFence function is not on.

3.2 Symbols on the display

These symbols are shown on the display of the product
when Automower ® Connect is enabled.
The signal strength of the GPRS
reception.
4.1 Main menu
Dashboard : Shows the current status of the
•
product. It shows symbols for the battery status
and cutting height.
Map : Shows the current position of the product and
•
the set centerpoint for GeoFence. You can monitor
the movement of the product with this function, for
example in case of theft.
Messages (only available for Bluetooth
•
range connectivity): In this menu the fault and

5.1 Technical data

Frequency Band Support
®
Automower Connect 2G
®
Automower Connect 4G
Power Class
®
Automower Connect 2G
Automower ® Connect 4G
1438 - 003 - 08.09.2020
4 Operation
4.2 My mowers
My mowers shows the status of the product, you can
remove or add products paired to the account.
®
short-
5 Technical data
GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
Band 12 (700 MHz), Band 17 (700 MHz), Band 28 (700 MHz), Band 13 (700 MHz),
Band 20 (800 MHz), Band 26 (850 MHz), Band 5 (850 MHz), Band 19 (850 MHz),
Band 8 (900 MHz), Band 4 (1700 MHz), Band 3 (1800 MHz), Band 2 (1900 MHz),
Band 25 (1900 MHz), Band 1 (2100 MHz), Band 39 (1900 MHz)
Power Class 4 (for GSM/E-GSM)
Power Class 1 (for DCS/PCS)
Power Class 3
Problem with the connection to the
Internet server.
Problem with the SIM card or the module.
information messages can be found. For some of
the messages, there is information to help you to
correct the fault.
33 dBm
30 dBm
23 dBm
Operation - 3