Safety Notes; Pin Assignment - D+H DDS54/500 Manual Original

Intended use
- Chain drive for electric opening of doors
- Operating voltage 24 VDC
- Useable in SHEV systems for operating smoke
extraction and fresh-air flaps
- It must always be possible to open the doors
and emergency exits of the building by han
(even in conjunction with electrically operated
door-locking systems)
- Only for inside mounting

Safety notes

Operating voltage 24 VDC!
Do not connect directly to the mains supply!
- Connection has to be carried out only by an
authorized electrical specialist
- Danger of violent pressure in handaccessible area
- Keep away people from the operating area of
the drive
- Keep away children from the control
- Use only in dry rooms
- Use rain detector in locations where there is a risk
of rain
- Only for inside mountingt
- Just use unchanged original D+H parts
- Observe the bracket-set mounting instructions
Observe enclosed red safety slip!
Extent of supply
Drive unit with 2.5 m silicone cable.
Mounting brackets (incl. 4 x M5 screws) and
door bracket for mounting above door frame.

Pin Assignment

Standard
WH (Mot. a)
BN (Mot. b)
YE (TÖ)
(WH) white
(BN) brown
(OG) orange
(YE) yellow
(GN) green
(PK) pink
(VT) violet
(GY) grey TÖ = door unlocking
4/12
DDS 54/500
Option -BRV Option V-SA
WH (Mot. a) WH (Mot. a)
BN (Mot. b) BN (Mot. b)
YE (TÖ) YE (TÖ)
GY (-BRV) GY (-BRV)
GN n.c.
PK (-SA)
VT (-SA)
English
Features
- Microprocessor controlled electronics
- Programmable with PLP1 and PDA service tool
- Connection for electrical unlocking of door
- Drive not directly connected to door wing
- Manual opening is still possible
Option -V-SZ
WH (Mot. a)
BN (Mot. b)
YE (TÖ)
GY (-BRV)
GN n.c.
PK (-SZ)
c
VT (-SZ)
no
Connection: Page 10
Option -SA-SZ
WH (Mot. a)
BN (Mot. b)
YE (TÖ)
GY (-SA)
GN (-SA)
PK (-SZ)
c
VT (-SZ)
no
99.824.05 2.2/08/12
no
c
c
no