EINHELL KSE 1435 Manual De Instrucciones página 22

Anl. KSE 1435,1635,1640 31.10.2001 7:57 Uhr
GB
How to eliminate technical faults
Please read the safety information on page 16 and 17
Fault Cause
Motor does not run No electricity
Chain brake
Chain does not move Chain brake
Poor cutting performance Blunt chain
Chain tension
Check that the chain
is fitted correctly
Saw works only with difficulty Chain tension
Chain jumps off sword
Chain becomes hot Chain lubrication
Never use tools with defective On/Off switches.
In the case of all other types of technical faults, please contact an authorized Customer Service workshop, our
Central Service Department, or your local dealer.
22
Seite 22
Remedy
Check socket, cable and plug.
Damaged cable: Have repaired by
Customer Service. It is prohibited to patch
the cable with insulating tape.
Damaged switches have to be replaced by
a Customer Service workshop.
See section 16 and 17 „Chain brake" and
„Releasing the chain brake".
Check the chain brake, release if
necesary.
Chain wrongly fitted
Sharpen the chain
Check the chain tension
Check the chain tension
Check oil level
Chain chain lubrication