Cleaning; Cleaning The Laminator; Cleaning The Heating Rollers - Easy Home OL 350-S Manual Del Usuario

USA

Cleaning

Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation and may cause
injury.
− Always let the laminator cool off completely before you
clean it!
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk due to improper operation!
Improper handling of the laminator may result in damage.
− Do not use any aggressive cleaners, brushes with metal
or nylon bristles, as well as sharp or metallic cleaning
utensils such as knives, hard scrapers and the like. They
could damage the surfaces.

Cleaning the laminator

1. Disconnect the power plug before cleaning.
2. Let the laminator cool off completely.
3. Use a damp cloth to wipe off the laminator. Then let all parts dry completely.

Cleaning the heating rollers

1. Move the multi-function switch
and operate it in hot mode.
2. Fold a sheet of paper and insert it, folded-edge first, into the pouch infeed
3
slot .
3. Keep repeating this process until no more glue deposits cling to the paper.
16
www.monolith-support.com
7
to "II" (HOT) to switch the laminator on
13" Laminator
AFTER SALES SUPPORT
1 877-386-8264
USA