Thank You; What Your Headset Can Do; Getting Started; Charge Your Headset - Jabra JX 10 Manual Del Usuario

Thank you

Thank you for purchasing the Jabra JX0 Bluetooth® Headset. We hope you enjoy it!
This instruction manual will get you started and ready to make the most of your headset.
!
Remember, driving comes first, not the call!
Using a mobile phone while driving can distract you and increase the likelihood of an
accident. If driving conditions demand it (such as bad weather, high traffic density,
presence of children in the car, difficult road conditions), pull off the road and park
before making or answering calls. Also, try to keep conversations short and do not make
notes or read documents.
Always drive safely and follow local laws.
About your Jabra JX10
1. LED light
• Blue indicates mode (pairing, active or standby)
• Red/green indicates battery level (low, charging, or charged)
2. Volume up (+), volume down (-)
3. Charging socket
4. Pairing button – press until the
LED light turns solid blue to put
the headset in pairing mode
5. Answer/end button
• Press to turn headset on
(blue flash burst indicates success)
• Press and hold to turn headset off
(blue flash burst indicates success)
• Tap to answer or end a call
2

What your headset can do

Your Jabra JX10 lets you do all this
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place a call on hold*
*Phone dependent
Specifications
• Up to 6 hours talk time/standby time up to 200 hours
• Rechargeable battery with charging option from AC power supply, PC via USB
cable, desktop charger or car charger (not included)
• Less than / ounce (0 grams)
• Operating range up to 33 feet (0 meters)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary) version .2

Getting started

The Jabra JX0 is easy to operate. The answer/end button on the headset performs
different functions depending on how long you press it.
Instruction: Duration of press:
Tap Press briefly
Press Approx:  second
Press and hold Approx: 5 seconds
1

Charge your headset

Make sure that your Jabra JX0 headset is fully charged for two hours before you start
using it. Use the AC power supply to charge from a power socket, or charge directly from
your PC with the USB cable provided. Connect your headset as shown in fig. 2. When the
LED is solid red, your headset is charging. When the LED is green, it is fully charged.
Charge from your desktop holder
Connect your USB cable/AC power supply to the desktop holder. Place your JX0 in the
cradle as shown in fig. 3
3