Phocos CXN Serie Manual De Instrucciones página 32

REMARK: place positive and negative wire close to each other to minimize
electromagnetic effects.
REMARK: Solar panels provide voltage as soon as exposed to sunlight. Mind
the solar panel manufacturer's recommendations in any case.
To avoid voltage at the load terminal, push the
button to shut off the load output. Connect the
wires leading to the loads with correct polarity.
Mind the recommended wire size:
CXN10: min 2.5 mm
2
CXN20: min 4 mm
CXN40: min 10 mm
Fasten the strain relieves.
29
2
2