Installation And Connection - Beko MOF 23110 X Manual Del Usuario

Installation and connection

3
3.1 Installation and
connection
• Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
• Remove any protective film found on the
microwave oven cabinet surface.
• Do not remove the light brown Mica cover that
is attached to the oven cavity to protect the
magnetron.
• Select a level surface that provide enough open
space for the intake and/or outlet vents.
30 cm
20 cm
20 cm
20 cm
min.85 cm
• Minimum installation height is 85 cm.
• The rear surface of appliance shall be placed
against a wall. Leave a minimum clearance of
30cm above the oven, a minimum clearance of
20cm is required between the oven and any
adjacent walls.
• Do not remove the legs from the bottom of the
oven.
• Blocking the intake and / or outlet openings can
damage the oven.
• Place the oven as far away from radios and TV
as possible. Operation of microwave oven may
cause interference to your radio or TV reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the frequency is
the same as the voltage and the frequency on
the rating label.
WARNING: Do not install oven
over a range cooktop or other heat-
A
producing appliance. If installed near
or over a heat source, the oven could
be damaged and the warranty would
be void.
Microwave Oven / User Manual
The accessible surface may be hot
during operation.
13 / EN