Canon PIXMA MX340 Serie Guia Del Usuario
  1. Manuales
  2. Marcas
  3. Canon Manuales
  4. Equipo de Oficina
  5. MX340 Serie
  6. Guia del usuario
Canon PIXMA MX340 Serie Guia Del Usuario

Canon PIXMA MX340 Serie Guia Del Usuario

Ocultar thumbs Ver también para PIXMA MX340 Serie:
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
Office All-In-One
Equipo multifunción de oficina
Getting Started
Read Me First
Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
series
ENGLISH
ESPAÑOL

Publicidad

Tabla de contenido
loading

Manuales relacionados para Canon PIXMA MX340 Serie

Resumen de contenidos para Canon PIXMA MX340 Serie

  • Página 1 ENGLISH ESPAÑOL Office All-In-One Equipo multifunción de oficina series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference. Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.

  • Página 2: Symbols Used In This Document

    ■ Symbols Used in This Document ■ Símbolos utilizados en este documento Prohibited actions. Acciones prohibidas. Instructions including important information. Instrucciones que incluyen información importante. Informational notes. Notas informativas. Operations that take some time to complete. Operaciones que tardan cierto tiempo en completarse. Indicates operations in Windows.

  • Página 3: Guía Básica

    On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 84. Los manuales en pantalla se pueden ver en un ordenador.
  • Página 4 ■ Contents ■ Contenido 1 Check the Included Items P.5 1 Compruebe los elementos que se incluyen P.5 2 Remove the Protective Material P.6 2 Retirada del material protector P.6 3 Connect the Telephone Line P.9 3 Conexión de la línea telefónica P.9 4 Turn the Power On P.11 4 Encendido del equipo P.11 5 Install the FINE Cartridges P.14...

  • Página 5: Flujo De Instalación Del Equipo

    ■ Machine Installation Flow Network Connection Conexión de red USB Connection ■ Flujo de instalación Conexión USB del equipo Wireless Connection Using from Additional Computers Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Uso desde ordenadores adicionales Machine Preparation...
  • Página 6 ■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, the following devices are required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesitan los siguientes dispositivos. The supplied Wireless LAN setup cable is temporarily required for wireless setup.
  • Página 7 Check that all the items shown below are included in the box. Compruebe que todos los elementos que se citan a continuación están incluidos en la caja. Telephone line cable Power cord Color Black FINE cartridges Color Negro Cable de línea telefónica Cable de alimentación Cartuchos FINE (FINE Cartridges) Wireless LAN setup cable...
  • Página 8 Remove all the protective materials and orange tape from the outside of the machine. Open the Paper Output Tray (A). • The tape and protective materials may differ in shape and position from what they actually are. Retire la cinta naranja y todos los materiales protectores del exterior del equipo. Abra la bandeja de salida del papel (A).
  • Página 9 Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C). Remove the orange tape (E) carefully. Close the Document Cover (D) and lift it with the Scanning Unit (Cover). The protective material (F) is removed along with the orange tape. Levante la unidad de escaneado (cubierta) (B) y sujétela con el soporte de la unidad Retire la cinta naranja (E) con cuidado.
  • Página 10 Lift the Scanning Unit (Cover) slightly (1) and fold the Scanning Unit Support (2), then gently close the Scanning Unit (Cover) (3). Levante la unidad de escaneado (cubierta) ligeramente (1) y pliegue el soporte de la unidad de escaneado (2) para cerrar después la unidad de escaneado (cubierta) (3) con cuidado.
  • Página 11 Do not turn the power on yet. Aún no encienda el equipo. To use the machine as a fax, a telephone line needs to be connected. This section describes the basic method of telephone line connection. For other connection methods, refer to the on-screen manual: Basic Guide. When not using as a fax: Go to "4 Turn the Power On"...
  • Página 12 Only when connecting a telephone: Sólo al conectar un teléfono: Connect one end of supplied telephone line cable (A) to the lower connector labeled Remove the Cap (C) (1), then connect a telephone with the telephone line cable (2). "L" on the machine, and then connect the other end to the telephone jack on the wall (B).
  • Página 13 Insert the power cord into the connector on the left side of the machine and into the wall outlet. • Do NOT connect the Wireless LAN setup cable (USB cable) at this stage. • Make sure that the Document Cover (A) is closed. •...
  • Página 14 Press the ON button (B) to turn on the Use the [ or ] button (C) on the Operation Panel to select Make sure that the above screen is displayed and go to the machine. the language for the LCD (Liquid Crystal Display) (D), then next step.
  • Página 15 When it is necessary to power off the machine Cuando sea necesario apagar el equipo Be sure to follow the procedure below. • When removing the power plug, make sure that the lamp of the ON button is not lit before removing the plug. Removing the power plug while the lamp of the ON button lights up or flashes may cause drying and clogging of the FINE Cartridges, resulting in poor printing.
  • Página 16 Lift the Scanning Unit (Cover) (A) and • Do not touch the buttons or LCD (F) on the Operation Panel (G). May result in unintended operation. fix it with the Scanning Unit Support (D). • When opening the Scanning Unit (Cover), the FINE Cartridge Holder moves automatically. •...
  • Página 17 Make sure that the FINE Cartridge Holder Follow the next procedure to insert the Black Open the Ink Cartridge Locking Cover on the right side. (H) moves to the installation position. Color FINE Cartridges into their corresponding slots Pinch (I) firmly and pull up the cover. Asegúrese de que el soporte de Siga el siguiente procedimiento para insertar los Abra la tapa de bloqueo del cartucho de tinta...

  • Página 18: Extraiga El Cartucho Fine (Fine Cartridge)

    Remove the Black FINE Cartridge from its package. Pull the orange protective tape (J) in the direction of the arrow and remove it carefully. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied FINE Cartridges.
  • Página 19 Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). •...
  • Página 20 Insert the Color FINE Lift the Scanning Unit (Cover) slightly (1) and fold Make sure that the LCD changes • Once you have installed the FINE Cartridge into the left the Scanning Unit Support (2), then gently close the as shown in the illustration and go Cartridges, do not remove them unnecessarily.
  • Página 21 Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Make sure that the height of the paper stack does not exceed the line (D).
  • Página 22 Read this section only when using the machine The following four modes are available for receiving faxes. Select a receive mode as a fax. according to your needs. You can change the receive mode any time. Refer to the on-screen manual: Basic Guide. If not using the machine as a fax, go to "8 Select Connection Method"...
  • Página 23 Intended Use Receive Mode Uso previsto Modo de recepción Want to use a telephone line for voice calls and faxes. • • Want to prioritize voice call reception over fax call reception because there are more opportunities to receive TEL priority mode voice calls.
  • Página 24 Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives: When a voice call arrives: Si recibe una llamada de fax: Si recibe una llamada de voz: While the telephone's ringtone sounds, pick While the telephone's ringtone sounds, pick up the up the handset.
  • Página 25 Press the FAX button (A), then press the Menu button (B). Use the [ or ] button (C) to select Receive mode set., Select a receive mode, then press the OK button. then press the OK button. The Fax settings screen is displayed. The Receive mode set.

  • Página 26: Usb Connection

    Intended Use Connection Method Device Required Uso previsto Método de conexión Dispositivo necesario • Want to connect to a computer with a USB USB Connection cable. Go to "9 Install the Software (1)" on page 26. • Si desea conectar a un ordenador con un cable USB.
  • Página 27 What is Network? If it is uncertain whether your device (access point, router, etc.) supports wireless connection, refer to the manual supplied with the device, or contact its manufacturer. A system to exchange information between computers by connecting them to each other with cables If your device supports wireless connection, check if it supports IEEE802.11b/g.
  • Página 28 Do not connect the USB cable yet. □ For Spanish Users in the U.S.A.: □ Para los usuarios de habla hispana de EE UU: Aún no conecte el cable USB. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
  • Página 29 □ If you connect the machine via USB cable before installing the software: □ Easy-WebPrint EX □ Si se conecta el equipo mediante un cable USB antes de instalar el software: □ Easy-WebPrint EX For Windows 7 If you are using Internet Explorer 7 or later, you can use the Web print 1.
  • Página 30 Press the ON button (A) to TURN OFF THE MACHINE. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. Operating noise may continue for up to 25 seconds until the machine If you are using Windows, the setup program starts automatically. turns off.
  • Página 31 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. Windows XP/Windows 2000 If the User Account Control dialog box reappears in following steps, click Continue or Yes. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Continuar (Continue) o en Sí...
  • Página 32 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. • If you want to select particular items to install, click Custom Install. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later.

  • Página 33: Puerto Usb

    □ USB Port □ Puerto USB Select Use the printer via USB, then click Next. When the Printer Connection screen appears, connect the machine to the computer with the USB cable. Follow any on-screen instructions to proceed with the software installation. After connecting the cable, TURN ON THE MACHINE.
  • Página 34 □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears □ Información necesaria para el registro de usuario (User Registration) □ Si aparece la pantalla Extended Survey Program Serial No. * * * * * * * * * The product serial number If you can agree to Extended Survey Program, click Agree.
  • Página 35 Click Exit to complete the installation. For Windows: For Macintosh: Solution Menu starts automatically. Click the icon on the Dock to start If Restart is displayed, follow the instruction to restart the computer. Solution Menu. For Macintosh: It is necessary to restart the computer before scanning using the Operation Panel on the machine Remove the Setup CD-ROM and keep it in a safe place.
  • Página 36 Before connecting the machine to the network, Access point or wireless router, etc. the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete. An "Ad-hoc connection," which Punto de acceso o router establishes a direct connection to the inalámbrico, etc.
  • Página 37 ■ Notes on Wireless Connection □ If your access point or router supports WPS (Wi-Fi Protected Setup): □ Si el punto de acceso o el router admiten WPS (Wi-Fi Protected Setup): ■ Notas acerca de la conexión inalámbrica • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
  • Página 38 Si tiene activada la función de firewall en el software de seguridad, puede aparecer un mensaje indicando que el software de Canon está intentando acceder a la red. En tal caso, configure el software de seguridad para que permita siempre el acceso.
  • Página 39 □ If you connect the machine via Wireless LAN setup cable before installing the software: □ Easy-WebPrint EX □ Si se conecta el equipo mediante un cable de configuración LAN inalámbrica antes de instalar el software: □ Easy-WebPrint EX For Windows 7 If you are using Internet Explorer 7 or later, you can use the Web print 1.
  • Página 40 Do not connect the Wireless LAN Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. setup cable yet. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. Software installation requires temporary use of the Wireless When the CD-ROM contents appear, double-click MSETUP4.EXE.
  • Página 41 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. Windows XP/Windows 2000 If the User Account Control dialog box reappears in following steps, click Continue or Yes. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Continuar (Continue) o en Sí...
  • Página 42 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. • If you want to select particular items to install, click Custom Install. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later.
  • Página 43 Select Use the printer on network, then click Next. When the Printer Detection screen appears, click Next. Follow any on-screen instructions to proceed with the software installation. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in −...
  • Página 44 Make sure the machine is turned on, then click OK. When the Set Up New Printer screen appears, click Next. • If the Detected Printers List screen appears, click Set Up New Printer. Compruebe que el equipo está encendido y, a continuación, haga clic en OK. Cuando aparezca la pantalla Configuración de una nueva impresora (Set Up New Printer), haga clic en Siguiente (Next).
  • Página 45 □ Proceed with the installation according to the displayed screen. The Detected Access Points Go to on page 44. List or Access Points screen The Confirm Connection Go to on page 45. Access Point screen When the Connect Cable screen appears, connect the machine to the computer with the Wireless LAN setup cable.
  • Página 46 □ If the Detected Access Points 1.Select the target access point name/network name (SSID). List screen or Access Points appears 2.Enter the network key. Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. To use WEP key number 2, 3 or 4, click WEP Key Number, then specify the WEP key number. 3.Click Connect.

  • Página 47: Si Aparece La Pantalla Comprobación Del Punto De Acceso De La Conexión (Confirm Connection Access Point)

    □ If the Confirm Connection Access Point screen appears □ Si aparece la pantalla Comprobación del punto de acceso de la conexión (Confirm Connection Access Point) Make sure that the target access point is displayed, then click Yes. If you are using Macintosh, a screen asking for permission to access the keychain appears. In this case, click Allow or Allow Once. Go to on page 46.
  • Página 48 When the Disconnect Cable screen appears, remove the Wireless LAN When the Setup Completion screen appears, click Complete or OK. setup cable, then click Next. • If the Automatic Setup or Auto Setup screen appears, click OK, then perform Go to "Install the Software (2) (Information)" on page 51! Go to "Install the Software (2) (Registration)"...
  • Página 49 This section describes how to register the machine on a Macintosh computer. Windows users: read "Install the Software (2) (Information)" on page 51. When the Register Printer and Scanner screen appears, click Register Printer. En esta sección se describe cómo registrar el equipo en un ordenador Macintosh.
  • Página 50 Go to on page 49. • The alphanumeric characters after Canon MX340 series is the machine's Bonjour service name or MAC address. • If the machine has not been detected, make sure of the following. − The machine is turned on.
  • Página 51 Mac OS X v.10.4.11 When the Printer List window Click More Printers in the Printer Select Canon IJ Network in the pop- Make sure that Canon MX340 series appears, click Add. Browser window. up menu, select Canon MX340 series is added to the list of printers.
  • Página 52 When the Register Printer and Scanner Select Canon MX340 series Click Next on the Register Printer and Scanner screen appears, click Register Scanner. on the Scan-from-PC Settings screen. screen, then click OK. Next, read "Install the Software (2) (Information)" on page 51!
  • Página 53 Click Next. Follow any on-screen instructions to proceed with the software installation. Haga clic en Siguiente (Next). Siga cualquier instrucción en pantalla para llevar a cabo la instalación del software.
  • Página 54 □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears □ Información necesaria para el registro de usuario (User Registration) □ Si aparece la pantalla Extended Survey Program Serial No. * * * * * * * * * The product serial If you can agree to Extended Survey Program, click Agree.
  • Página 55 Click Exit to complete the installation. For Windows: For Macintosh: Solution Menu starts Click the icon on the Dock If Restart is displayed, follow the instruction to restart the computer. automatically. to start Solution Menu. For Macintosh: It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
  • Página 56 Using the Machine from Additional Computers Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. For the software installation procedure, refer to "Install the Software (3)"...
  • Página 57 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). If not using WPS, the following procedure is not necessary. • For details on WPS, refer to the manual of your access point. Use the Menu button (A) to select Device settings.
  • Página 58 Use the [ or ] button (B) to select LAN settings, then press the Select WLAN active/ Select Wireless LAN active, then press the OK button. OK button. inactive, then press When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. the OK button.
  • Página 59 Select Wireless LAN Select WPS, then press Select Push button • To use the PIN code method for setup, select PIN code method in , then press the OK setup, then press the the OK button. method, then press button. Follow the on-screen instructions to operate the machine and access point. When the screen in appears, press the OK button.
  • Página 60 Press and hold the WPS button on the access point Press the OK button. Press the COPY button (D). (for about 5 seconds), then press the OK button on The LAN settings screen is displayed. The copy standby screen is displayed. the machine within 2 minutes.
  • Página 61 Antes de configurarla mediante la función WCN, establezca una comunicación inalámbrica entre el ordenador y el punto de acceso. • Canon no asume ninguna responsabilidad en el caso de que se pierdan o dañen los datos almacenados en la unidad flash USB, con independencia del motivo, incluso dentro del periodo de garantía.
  • Página 62 Windows Vista Windows 7 (P.62) From the Start menu of the Windows Click Add a wireless device on the Click I want to add a wireless device Click Add the device or computer side, click Network. menu. or computer that is not on the list, using a USB flash drive.
  • Página 63 From the list, select the network name (SSID), then click Next. Connect the USB flash drive to the When the above screen appears, computer, make sure that the drive remove the USB flash drive from name is displayed, then click Next. the computer, then click Close.
  • Página 64 Windows 7 Click Start > Control Panel > Select the network name (SSID) Select Copy this network profile When the above screen appears, View network status and tasks > from the list and right-click it, then to a USB flash drive. remove the USB flash drive from Manage wireless networks.
  • Página 65 Use the Menu button (A) to select Device settings. Use the [ or ] button (B) to select LAN settings, Select WLAN active/inactive, then press the OK button. then press the OK button. The LAN settings screen is displayed. The WLAN active/inactive screen is displayed. Utilice el botón Menú...
  • Página 66 Select Wireless LAN active, then press the OK button. Select Wireless LAN setup, then press the OK button. Select WCN, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (C) lights blue. The Wireless LAN setup screen is displayed. The Connect USB drive on which LAN details are saved and press [OK] screen is displayed.
  • Página 67 Connect the USB flash drive to the Direct Print Port (USB connector) Press the OK button, Press the COPY button (E). (D) on the front of the machine, then press the OK button. then remove the USB flash The copy standby screen is displayed. drive from the machine.
  • Página 68 Si tiene activada la función de firewall en el software de seguridad, puede aparecer un mensaje indicando que el software de Canon está intentando acceder a la red. En tal caso, configure el software de seguridad para que permita siempre el acceso.
  • Página 69 □ Easy-WebPrint EX If you are using Internet Explorer 7 or later, you can use the Web print software Easy-WebPrint EX. An internet connection is required for installation. Make sure that the machine is turned on and that the Wi-Fi lamp (A) lights blue. •...
  • Página 70 Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. If you are using Windows, the setup program starts automatically. For Windows • If the program does not start automatically, double-click the CD-ROM icon in Computer or My Computer. When the CD-ROM contents appear, double-click MSETUP4.EXE. Encienda el ordenador y, a continuación, introduzca el Setup CD-ROM en la unidad de CD-ROM.
  • Página 71 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. Windows XP/Windows 2000 If the User Account Control dialog box reappears in following steps, click Continue or Yes. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Continuar (Continue) o en Sí...
  • Página 72 Click Easy Install. Click Install. The drivers, application software, and on-screen manuals are installed all together. For Windows • To install Easy-WebPrint EX, you need to connect your computer to the internet at this stage. • If you want to select particular items to install, click Custom Install. (Internet Explorer 7 or later is required.) If an internet connection is not available, it is also possible to install this software later.
  • Página 73 Select Use the printer on network, then click Next. When the Printer Detection screen appears, click Next. Follow any on-screen instructions to proceed with the software installation. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in −...
  • Página 74 Lista de impresoras detectadas la configuración (Setup Completion), haga (Detected Printers List), seleccione clic en Completada (Complete) o en OK. Canon MX340 series y, a continuación, haga clic en Siguiente (Next). A continuación, lea “Instalación del software (3) (Información)” •...
  • Página 75 This section describes how to register the machine on a Macintosh computer. Windows users: read "Install the Software (3) (Information)" on page 78. When the Register Printer and Scanner screen appears, click Register Printer. En esta sección se describe cómo registrar el equipo en un ordenador Macintosh.
  • Página 76 Vaya a en la página 75. • Los caracteres alfanuméricos que aparecen a continuación de Canon MX340 series son el nombre del servicio Bonjour o la dirección MAC del equipo. • Si no se ha detectado el equipo, compruebe lo siguiente.
  • Página 77 76. • When the You have no printers available. screen appears, click Add. Seleccione Canon MX340 series y haga clic en Agregar (Add). Cuando aparezca la ventana Haga clic en Más impresoras Lista de impresoras (Printer List), (More Printers) en la ventana Navegador Vaya a en la página 76.
  • Página 78 Select Canon IJ Network in the pop-up Make sure that Canon MX340 series When the Register Printer and Scanner screen appears, menu, select Canon MX340 series in the is added to the list of printers. click Register Scanner. list of printers, then click Add.
  • Página 79 Select Canon MX340 series on the Scan-from-PC Click Next on the Register Printer and Scanner screen. Settings screen, then click OK. Next, read "Install the Software (3) (Information)" on page 78! Seleccione Canon MX340 series en la pantalla Haga clic en Siguiente (Next) en la pantalla Conf.
  • Página 80 Click Next. Follow any on-screen instructions to proceed with the software installation. Haga clic en Siguiente (Next). Siga cualquier instrucción en pantalla para llevar a cabo la instalación del software.
  • Página 81 □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears □ Información necesaria para el registro de usuario (User Registration) □ Si aparece la pantalla Extended Survey Program Serial No. * * * * * * * * * The product serial number If you can agree to Extended Survey Program, click Agree.
  • Página 82 Click Exit to complete the installation. For Windows: For Macintosh: Solution Menu starts Click the icon on the Dock If Restart is displayed, follow the instruction to restart the computer. automatically. to start Solution Menu. For Macintosh: It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. Remove the Setup CD-ROM and keep it in a safe place.
  • Página 83 Using the Machine from Additional Computers Now that the wireless connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. For the software installation procedure, refer to "Install the Software (3)"...

  • Página 84: Para Utilizar Desde Ordenadores Adicionales

    If the machine is already connected to a wireless connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica, se puede utilizar desde ordenadores adicionales de la misma red. To use from additional computers Computer from which the machine can be used currently Insert the Setup CD-ROM into the computer from which...
  • Página 85 Use the Operation Panel on the machine to print your own items easily. Various application software are installed on the computer along with the drivers. You can print creative items by correcting/ enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Utilice el panel de control del equipo para imprimir fácilmente sus propios elementos.
  • Página 86 Solution Menu Solution Menu is a gateway to functions and information that allow you to make full use of the machine! For example, How to open the on-screen manual How to start Solution Menu Click this icon on the desktop (Windows) or on •...
  • Página 87 Load A4 or Letter-sized plain paper. Open the Document Cover (B). Make sure that the Paper Output Tray (A) is open. This section describes how to perform a standard copy. • For details, refer to "6 Load Paper" on page 19. •...
  • Página 88 Place the document face-down and align it with the Close the Document Cover, press the COPY • Hold the Document Cover firmly when closing it because it is heavy. Alignment Mark (C). button (E), then press the Black button (F) •...
  • Página 89 Load 4" x 6" size photo paper in portrait orientation with the Start Solution Menu from the Canon Solution Menu icon on the desktop (Windows) printing side facing up. or on the Dock (Macintosh), then click One-Click to Photo Print.
  • Página 90 Select the image you want to print, then click Layout/Print. Click Print. If you are using Windows, printing will start. When a photo is selected, the number of copies is set to "1". If you are using Macintosh, click Print on the Print dialog box to start printing. For more information, refer to the on-screen manual: Advanced Guide.
  • Página 91 Press the FAX button (A). The fax standby screen is displayed. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • Make sure that the telephone line type is set correctly. For the setting procedure, refer to "Preparing for Faxing" in the on-screen manual: Basic Guide. •...
  • Página 92 Open the Document Tray (C), then move the Document Guides (D) to both edges. Insert the document until a beep sounds, then slide the left and right Document Guides against both ends of the document. • For details on supported documents and settings for image quality, density (brightness), etc., •...
  • Página 93 Use the Numeric buttons (E) to enter Press the Black button (F). the fax number. The fax is sent. • If fax sending is unsuccessful, confirm that the phone line is connected correctly as described For other procedures to send faxes, refer to "Faxing" in the on-screen manual: in "3 Connect the Telephone Line"...
  • Página 94 After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required.

  • Página 95: General Specifications

    Bluetooth v2.0 (Option) *2 *3 *4 (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard USB flash drive chart No.1 for others, both in standard mode or Canon FAX Standard chart No.1, standard mode.) LAN Port: Color: Approx. 1 minute/page at 33.6 kbps Wireless LAN: IEEE802.11b/IEEE802.11g *5...
  • Página 96 Macintosh: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended. (FINE Cartridge) Color: 384 x 3 inyectores • Macintosh: After upgrading from Mac OS X v.10.5 or lower to Mac OS X v.10.6, install software bundled with the Canon de Canon inkjet printer. Capacidad del ADF Tamaño A4 o Carta: 30 hojas máx.
  • Página 97 Windows: sólo se garantiza el funcionamiento en un PC con Windows 7, Windows Vista, Windows XP o Windows 2000 preinstalado. Especificaciones de red • Windows: desinstale primero el software incluido con la impresora de inyección de tinta Canon antes de actualizar de Windows Vista a Windows 7 y, a continuación, vuelva a instalar el software. Protocolo de TCP/IP •...

  • Página 98: Cómo Solicitar Ayuda A Canon

    CL-211 2976B001 CL-211 2976B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon Llame a 1-800-OK-CANON para localizar un distribuidor cercano o visite online store at www.shop.usa.canon.com la tienda en línea de Canon en www.shop.usa.canon.com CANON U.S.A. INC.

Tabla de contenido