Initial System Setup; Ulpa Filter Installation - CooperSurgical LEEP PRECISION LP-30-220 Manual De Funcionamiento

LP-30-220 • LEEP PRECISION

Initial System Setup

The system arrives in one carton that contains the Vacuum Unit. The
disposable accessories necessary to conduct procedures may be
purchased separately from CooperSurgical.

ULPA Filter Installation

Insert the large ULPA Filter cylinder with the Air
Flow arrow pointing downward (see Photo A).
Operating Instructions
Prepare the unit for use by inserting a clean,
disposable Pre-Filter onto the ULPA Filter
cylinder (see Photo B). Be sure this device is
firmly seated.
For procedures requiring close proximity plume removal (i.e., vaginal
speculum)
Assemble the ⅜-inch Reducer (Catalog number
6083) onto the port on the disposable Pre-Filter
top with a slight twisting motion. Attach one end
of an appropriate length of ⅜-inch inner diameter
(ID) Evacuation Tubing (Catalog number 6084) to
the Reducer Connector and direct the other end
to the patient and any appropriate device being
used, such as a vaginal speculum equipped with
a Smoke Evacuation Adapter (see Photo C).
Operating Manual • English (continued)
TM
Smoke Evacuation System, 230 VAC
2
Photo A
Photo B
Photo C