Use And Operation; Switching The Convection Heater On And Off - Easy Home CH-Y01AFT Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USA

Use and operation

CAUTION!
Risk of short circuit!
Make sure that the convection heater is switched off before
you connect the convection heater with a socket with earthing
contact.
− Switch all inputs/outputs off and turn the thermostat con-
trol counterclockwise to the stop point at the MIN position.
− Connect the power plug with a socket with earthing contact.
− Do not in any case use an extension cord or multiple sock-
et strip.
CAUTION!
Fire hazard!
Using an external switching device like a timer poses a risk of
fire and a risk of injury to persons and damage to property
due to overheating of the convection heater.
− Do not in any case use an external switching device to
switch the convection heater on or off. This may cause an
unintended reset of the temperature limiter and the con-
vection heater to overheat as a result.
r to overheat a
− Never connect the convection heater to an electric circuit
ect the convec
ect the con
that is regularly switched on and off by a device, e.g. a
gularly swit
gularly switch
multiple socket strip that can be switched.
ocket st
ocket strip
Use and operation

Switching the convection heater on and off

NOTICE!
Odors may be produced the first time you use the device. This
is due to the construction and does not represent a defect.
Make sure there is adequate ventilation.
The main switch is the sliding switch
18
serviceusa@tempo.org
ce like a timer
ike a timer
ons and damag
ns and damag
onvection h
onvection heat
e an e
n
external s
xterna
on heater on o
n heater o
et of the tempe
of the tem
overhe
15
on the timer.
mu
AFTER SALES SUPPORT
USA
866-235-5029

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido