Installation Overview - Brother innov-is Quattro 6000D Guia De Instalacion

Accessories
The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized dealer.
• CD-ROM (For details regarding contents, refer to
the following.)
• Installation Guide (this guide)
In addition, this kit contains the bobbin case (gray) and
the bobbin cover for bobbin work.
• Bobbin case (gray)
This bobbin case is only for bobbin work. The
bobbin case will allow you to sew with thick
thread or narrow ribbon that cannot be inserted
through the eye of the needle. There is a notch at
the location indicated by the letter "A".
• Bobbin cover with tabs (for bobbin work)
There are two small v-shaped tabs on the back of
the bobbin cover as indicated by the letter "B".
The tabs help hold the bobbin in place so it does
not lift up while thick thread is being pulled
through. This bobbin cover can also be used with
normal sewing.
Note
• For details on proper use of the included
accessories see the Operation Manual viewable
from the disc by clicking on the "manual" folder and
selecting your preferred language.
You may also view the Operation Manual or New
Features of Version 2 by clicking on the
"manual_index.pdf" icon contained within the disc
and selecting either file listed to the side of your
preferred language.
2
Contents of CD-ROM
• Certification Key Issuing Wizard
I
• Upgrade KIT Operation Manual (PDF)
* Adobe Reader is required for viewing and printing the
Operation Manual.
• Upgrade application for KIT
Note
• Upgrade application data is contained in the
"NV6000D(US)", "NV6000D(Canada)" or "NV1"
folder. Select the appropriate folder for your model.

Installation Overview

First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the CERTIFICATION key within the Settings screen,
page 5, to activate the upgrade application for KIT
the sewing machine.
In the procedures,
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the machine
number (No.).
[Step 2] Insert the CD-ROM into the
computer's CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
I
for KIT on the sewing machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the "KIT I"
in the Settings screen of the sewing
machine.
I
I
on
indicates operations