Touch Operation - Legamaster ETX Serie Manual Del Usuario

TOUCH OPERATION

7. TOUCH OPERATION
To be able to control various (enabled) sources using the e-screens touch-functionality, a dedicated connection
between the e-screen and the source is needed using a (supplied) USB cable:
1. Connect the source with the screen using a video cable (VGA / HDMi / Displayport)
2. Use the supplied USB cable to connect the source with the screen, using the USB-A connector for the source
and the USB-B connector with the screen.
3. Turn both the screen and the source on. It may take up to 5 seconds for touch to become active.
17
ETX-SERIES – USER MANUAL – ENGLISH